1. Site specifications: not less than 32m (length) x 19m (width) x 4m (height). Configure 2 doors.
1. Frame purse seine system: the columns are made of round steel pipes, the spacing between the columns is ≤3 meters, and the overall height is ≥ 4.0 meters. The purse seine system adopts a double-layer frame structure, and the hook net is pressed with a strip, and then the angle steel frame is pressed on the edge of the hook net. The edge of the hook mesh can be hidden in the angle steel, which is safe and beautiful. The hook mesh is PE plastic coated mesh, low-carbon galvanized iron wire, and the color is dark green.
3. Box basketball stand: 4870x1800x3950mm; The backboard is made of SMC sheet molding compound, specification: 1800mmx1050mm; The basketball stand column and cantilever beam are made of 150mmx150mmx4mm pipes; Hoop: made of solid steel, the diameter of the hoop is 20mm; The base box is supported by an integral skeleton and covered with steel plates; Integral counterweights are placed in the box and high-strength supports are added. Equipped with 1 pair of basketball nets.
3. Badminton net: shell ABS - one-time forming, counterweight mobile, column height 1550mm, ¢42 steel pipe, stable base without shaking, with badminton net and 1 pair of steel wire.
4. Volleyball column: the column is made of φ89x3mm steel pipe, the height of the column is 2120mm, the hook spacing is 200mm, the upper part of the column is embedded with a pulley device, and the column on one side has a tight line device to facilitate the installation of the volleyball net, and the base box has a hub device to facilitate movement.
5. Supporting lighting system: the lamp post is a part of the fence, and it is also the main column of the fence in the whole fence to enhance the stability of the fence, and the lamppost is made of steel pipes, 4 lamp posts, and 2 lamps each. It adopts special lamps for cage football field, which can be adjusted at an angle of 30°, and the brightness meets international standards, and the illumination is uniform, and the light is soft and not dazzling.
6. Billboards: firmly fixed in the import and export area, the panel is made of stainless steel, with a thickness of 1mm, the edge and sharp corners of the panel shall not be warped, and the pattern and words are etched; The content includes: the name of the product; Concise scientific fitness tips, safety precautions for product use; The full name of the product supplier, after-sales service telephone and supervision telephone; Manage the maintenance unit and contact number, etc.
7. Silicon PU ground: The site is laid with domestic silicon PU stadium materials, with a total thickness of not less than 5mm, which is divided into a bottom rubber layer, a buffer layer, a reinforcing layer and a topcoat layer. The product has excellent anti-aging and acid mist, warm, ozone and ultraviolet functions. It has the characteristics of anti-slip and wear-resistant; It has moderate elasticity and rebound power. The marking line is clear, non-reflective, no obvious dotted edge, and firmly bonded with the surface layer. The pass rate of flatness is not less than 85%. There are no cracks, delamination, cracks, crocodile skin cracks and glass cracks in the appearance, no obvious concave and convex phenomena, and the surface color is uniform and durable.
Cangzhou Xinlong Teaching Equipment Manufacturing Co., Ltd. was established in 2007. The company is located in Macun Industrial Development Zone, Yanshan County, Hebei Province. It is adjacent to the Bohai Economic Rim and Rongwu Expressway in the east, and relies on National Highway 205 in the west. It is within the one-hour economic circle of Beijing, Tianjin and Hebei, with very convenient transportation. Our company is a modern private enterprise mainly engaged in the research and development, production and sales of indoor and outdoor fitness equipment, campus sports equipment, plastic sports fields, and teaching laboratory equipment.
